|
Materials:
Iosso Metal Processes can be bonded directly to all iron based
metals, tool steel alloys, stellite, stainless steel, brass, bronze,
beryllium copper, tungsten carbide, ferro-tic carbide and zinc.
Benefits:
 increases
surface hardness up to 72 R.C.
extends
base metal life
reduces
corrosion
increases
life expectancy
increases
resistance to wear
reduces
friction |
|
Characteristics:
no
hydrogen faults, cracks or blisters
no
peeling, flaking or spalling
anti-galling, anti-soldering
non-magnetic, static free
heat
resistant
corrosion
resistant |
Surface thickness and coverage:
controlled tolerances range from .000020 to .0005
penetration of base metal up to 15 millionths of an
inch
hardness
up to 72 R.C.
uniform
over complex shapes
no
build-up on sharp edges or corners |
 |
Applications include but are not limited
to:
Component
wear parts: shafts, gears, cams, rollers,
pinions, valves, valve
spools, pistons, bearings, seals.
Molds,
dies, cavities, cores, ejector pins.
Blades,
knives, cutters, scissors, slitters,
Roll
forming dies, cutting tools. |
|
Physical Capabilities:
Small
parts from 1/4" and up.
Large
parts from 6 feet by 2 feet. |
Photo micro-graph:
 Photo
micro-graph of .00010 thickness penetration into base metal contours
with pore-free, crack-free deposit with complete
uniformity. The picture shows a cross section of a four flute mill
depicting uniformity over a complex shape, with no edge buildup.
The bright uniform outline of this end mill cross section shows the
Iosso process. Deposit conforms completely to the complex shape of
this typical cutting tool.
Life expectancy is 5 to 8 times greater than an
unprocessed identical tool.
The
IOSSO-FE
Process
|
